wire / wire-format / ddr-timing

DDR (Double Data Rate) memory timing

DDR memory timing parameters define the timing of memory operations. Key parameters: CAS latency (CL, column address strobe), RAS to CAS delay (tRCD), Row Precharge time (tRP), Row Active time (tRAS), Row Cycle time (tRC = tRAS + tRP). DDR transfers data on both clock edges (rising and falling), doubling bandwidth. DDR4: 2133-3200 MT/s. DDR5: 4800-8400 MT/s.

wire-format kind wire-format status standard verification verified tier B wire-format@1

aka: DDR (Double Data Rate) memory timing

wire format

spec: DDR4/DDR5 specification (JEDEC)

DDR memory timing parameters define the timing of memory operations. Key parameters: CAS latency (CL, column address strobe), RAS to CAS delay (tRCD), Row Precharge time (tRP), Row Active time (tRAS), Row Cycle time (tRC = tRAS + tRP). DDR transfers data on both clock edges (rising and falling), doubling bandwidth. DDR4: 2133-3200 MT/s. DDR5: 4800-8400 MT/s.

fieldsizemeaning
CAS latency (CL)cyclesColumn Address Strobe latency: time from column address to data available. E.g., CL16 = 16 cycles.
tRCD (RAS to CAS delay)cyclesTime from row activation to column access. Typically equal to CL.
tRP (Row Precharge time)cyclesTime to precharge (close) a row before opening a new one. Typically equal to CL.
tRAS (Row Active time)cyclesMinimum time a row must be active. tRAS = tRCD + tCAS + tBURST (typically 30-40 cycles).
tRC (Row Cycle time)cyclestRC = tRAS + tRP. Minimum time between row activations.
DDR (Double Data Rate)transferData transferred on both rising and falling clock edges. 2x bandwidth vs SDR.
Burst lengthBL88 data beats per access (BL8). Each beat = 64 bits (8 bytes). Total = 64 bytes = cache line size.
Prefetch8n (DDR4), 16n (DDR5)DDR4: 8n prefetch (8 beats fetched per access). DDR5: 16n prefetch (16 beats).

example:

00 00

DDR timing (placeholder)


provenance

agent: curl -H 'accept: application/json' wire.phall.io/wire-format/ddr-timing or /wire-format/ddr-timing.json