wire / wire-format / ethernet-phy
The Ethernet PHY (Physical Layer) handles the physical transmission of Ethernet frames. MII (Media Independent Interface) connects MAC to PHY: 4-bit data path, 2.5/25/125 MHz clock. RMII (Reduced MII): 2-bit data path, 50 MHz clock. GMII (Gigabit MII): 8-bit data path, 125 MHz clock. RGMII (Reduced GMII): 4-bit data path, 125 MHz clock (double data rate). SGMII (Serial GMII): serial, 1.25 Gbps. Auto-negotiation: PHYs advertise capabilities (speed, duplex) via FLP (Fast Link Pulse) bursts.
aka: Ethernet PHY (Physical Layer) interface
spec: IEEE 802.3
The Ethernet PHY (Physical Layer) handles the physical transmission of Ethernet frames. MII (Media Independent Interface) connects MAC to PHY: 4-bit data path, 2.5/25/125 MHz clock. RMII (Reduced MII): 2-bit data path, 50 MHz clock. GMII (Gigabit MII): 8-bit data path, 125 MHz clock. RGMII (Reduced GMII): 4-bit data path, 125 MHz clock (double data rate). SGMII (Serial GMII): serial, 1.25 Gbps. Auto-negotiation: PHYs advertise capabilities (speed, duplex) via FLP (Fast Link Pulse) bursts.
| field | size | meaning |
|---|---|---|
| MII | interface | 4-bit data (TXD/RXD), TX_EN, RX_DV, TX_CLK, RX_CLK, CRS, COL, MDIO, MDC. 2.5 MHz (10Mbps), 25 MHz (100Mbps). |
| RMII | interface | 2-bit data (TXD/RXD), TX_EN, CRS_DV, REF_CLK (50 MHz). Reduces pin count. |
| GMII | interface | 8-bit data, 125 MHz clock. For 1000BASE-T. |
| RGMII | interface | 4-bit data, 125 MHz clock (DDR: both edges). Reduces pin count for gigabit. |
| SGMII | interface | Serial: 1.25 Gbps differential pair. For 1000BASE-X (fiber) or 1000BASE-T. |
| Auto-negotiation | protocol | FLP (Fast Link Pulse) bursts advertise capabilities. Next pages for extended capabilities (10GBASE-T, etc.). |
| MDIO/MDC | interface | Management Data I/O: serial interface for reading/writing PHY registers (clause 22 or clause 45). |
example:
00 00 00 00
Ethernet PHY (placeholder)
agent: curl -H 'accept: application/json' wire.phall.io/wire-format/ethernet-phy
or /wire-format/ethernet-phy.json