wire / wire-format / sram-cell

SRAM cell (6T)

A 6-transistor (6T) SRAM cell stores 1 bit. Structure: two cross-coupled inverters (4 transistors: 2 PMOS + 2 NMOS) forming a bistable latch, plus two access transistors (NMOS) controlled by the word line. Bit lines (BL, BL_bar) are used for read/write. Read: precharge BL/BL_bar, assert word line, sense differential. Write: drive BL/BL_bar to the desired value, assert word line.

wire-format kind wire-format status standard verification verified tier B wire-format@1

aka: SRAM cell (6T)

wire format

spec: SRAM design

A 6-transistor (6T) SRAM cell stores 1 bit. Structure: two cross-coupled inverters (4 transistors: 2 PMOS + 2 NMOS) forming a bistable latch, plus two access transistors (NMOS) controlled by the word line. Bit lines (BL, BL_bar) are used for read/write. Read: precharge BL/BL_bar, assert word line, sense differential. Write: drive BL/BL_bar to the desired value, assert word line.

fieldsizemeaning
Storage inverters4 transistors2 cross-coupled CMOS inverters (2 PMOS + 2 NMOS). Bistable: holds 0 or 1.
Access transistors2 NMOSConnect the cell to bit lines (BL, BL_bar) when word line is asserted.
Word line (WL)1 wireControls access transistors. Asserted to read/write.
Bit lines (BL, BL_bar)2 wiresDifferential pair for read (sense) and write (drive).
Read operationaccessPrecharge BL/BL_bar to VDD, assert WL, sense the differential. Cell must not flip (read stability).
Write operationaccessDrive BL to desired value, BL_bar to complement, assert WL. Cell flips to new value.
Read stabilitydesign paramCell ratio (pull-down vs access transistor strength) must ensure read doesn't flip the cell.
Write abilitydesign paramAccess transistor must be strong enough to overpower the inverter during write.

example:

00 00

SRAM 6T cell (placeholder)


provenance

agent: curl -H 'accept: application/json' wire.phall.io/wire-format/sram-cell or /wire-format/sram-cell.json